LED Lamps, Luminaries and Accessories
Delhi Test House is a well known Luminaire Testing Lab and having NABL enfranchisement. The Laboratory is following the procedure PRN by International normal IEC 17025 and is already certified for ISO 17025 by NABL.
Our research laboratory is completely equipped with following high accuracy testing instruments to supply a complete testing answer for light-emitting diode primarily based product.
- Integrating Sphere
- Goneophotometer
- Standard Light Source
- Digital Power Meter
- LED Power Driver Tester
- High Precision CCD Spectroradiometer
- Digital CC and CV DC Power Supply
- Electrical Safety analyzer and more
Keep pace with advanced Luminaire Testing Lab technologies
New Luminaire Testing Laboratories technologies like compact fluorescent lamps (CFLs) and light-weight emitting diodes (LEDs) square measure reworking the industry, leading to prime quality lighting product that also are additional energy economical. However, the introduction of recent lighting technologies typically needs makers of luminaires and lighting to change existing product in order that they'll accommodate these new Luminaire Testing Lab technologies. This can be particularly the case for industrial and industrial lighting installations, wherever retrofitting existing fixtures could represent the sole cost-efficient approach.
| Testing Parameters | Test Method |
|---|---|
| 1) Bayonet Lamp Holders (for B-22d Size Only Without Threaded Entry Lamp Holder) | |
| Rating | IS 1258: 2005 Clause. 6 |
| Classification | IS 1258: 2005 Clause. 7 |
| Markings | IS 1258: 2005 Clause. 8 |
| Checking of Dimensions | IS 1258: 2005 Clause. 9 |
| Protection Against Electric Shock | IS 1258: 2005 Clause. 10 |
| Terminals | IS 1258: 2005 Clause. 11 |
| Provision of Earthing | IS 1258: 2005 Clause. 12 |
| Construction Requirement | IS 1258: 2005 Clause. 13 |
| Switched Lampholder | IS 1258: 2005 Clause. 14 |
| Moisture Resistance | IS 1258: 2005 Clause. 15 |
| Insulation Resistance (After Moisture Test) | IS 1258: 2005 Clause. 15 |
| Electric Strength (After Moisture Test) | IS 1258: 2005 Clause. 15 |
| Mechanical Strength | IS 1258: 2005 Clause. 16 |
| Screw, Current Carrying Parts and Connections | IS 1258: 2005 Clause. 17 |
| Creepage Distances and Clearance | IS 1258: 2005 Clause. 18 |
| General Resistance To Heat | IS 1258: 2005 Clause. 19 |
| Resistance to Heat 13 | IS 1258: 2005 Clause. 20 |
| Glow Wire Test 18 | IS 1258: 2005 Clause. 20.3 |
| Tracking Test 66 | IS 1258: 2005 Clause. 20.4 |
| Resistance To Excessive Residual Stresses (Season Cracking) and to Rusting) 12, 13, 14 | IS 1258: 2005 Clause. 21 |
| 2) GLS Lamps | |
| Characteristics & tolerances of initial readings | IS 418, Cl. 8, IEC 60064 |
| Lumen Maintenance | IS 418, Cl. 9, IEC 60064 |
| Life Test requirements | IS 418, Cl. 10, IEC 60064 |
| Dimensions | IS 418, Cl. 7, IEC 60064 |
| 3) Single Capped Fluorescent Lamps (Performance Requirements) | |
| Caps | IEC 60901 (Cl.1.5.2) |
| Dimensions | IEC 60901 (Cl.1.5.3) |
| Electrical & Cathode characteristics | IEC 60901 (Cl.1.5.5) |
| Marking | IEC 60901(Cl.1.5.9) |
| Lumen Maintenance | IEC 60901 (Cl.1.5.7) |
| Photometric Characteristics | IEC60901 (Cl.1.5.6) |
| 4) Double Capped Fluorescent Lamps (Performance Requirements) | |
| Caps | IEC 60081 (Cl.1.5.2) |
| Dimensions | IEC 60081 (Cl.1.5.3) |
| Electrical & Cathode Characteristics | IEC 60081 (Cl.1.5.5) |
| Marking | IEC 60081 (Cl.1.5.8) |
| Photometric Characteristics | IEC 60081 (Cl.1.5.6) |
| Lumen Maintenance | IEC 60081 (Cl.1.5.7) |
| 5) Self-Ballasted LED Lamps for General Lighting Services (Performance Requirements) | |
| Marking | IS 16102(P-2), Cl. 5 & IEC 62612 |
| Dimension | IS 16102(P-2),Cl. 6 & IEC 62612 |
| Test Condition | IS 16102(P-2) Cl. 7, IEC 62612, IS 16106, & IES LM 79 |
| Lamp power | IS 16102(P-2) Cl. 8, IEC 62612, IS 16106, & IES LM 79 |
| Luminous flux | IS 16102(P-2) Cl. 9, IEC 62612, IS 16106, & IES LM 79 |
| Centre Beam Intensity & Beam Angle | IS 16102(P-2) Cl.10 & 11, IEC 62612, IS 16106, & IES LM 79 |
| Color nomenclature, Variation and Rendering | IS 16102(P-2) Cl.12, IEC 62612 |
| CRI | IS 16102(P-2) Cl.12 & IEC 62612 |
| Harmonics and Power Factor | IS 16102(P-2) Cl.12 & IEC 62612, |
| Lamp Life | IS 16102 (P-2) Cl.13 & IEC 62612, IS 16105 & IES LM 80 |
| 6) LED Modules for General Lightning (Performance Requirements) | |
| Marking | IS 16103 (P-2) Cl. 4 & IEC 62717 |
| Dimension | IS 16103 (P-2) Cl. 5 & IEC 62717 |
| Test Condition | IS 16103 (P-2) Cl. 6 & IEC 62717 |
| Module Power | IS 16103 (P-2) Cl. 7 & IEC 62717 |
| Luminous Flux | IS 16103 (P-2) Cl. 8.1 & IEC 62717 |
| Luminous intensity Distribution, Peak Intensity and Beam angle | IS 16103 (P-2) Cl. 8.2 & IEC 62717 |
| Efficacy | IS 16103 (P-2) Cl. 8.2 & IEC 62717 |
| Chromaticity Coordinates | IS 16103 (P-2) Cl. 8.2 & IEC 62717 |
| Correlated Colour Temperature | IS 16103 (P-2) Cl. 8.2 & IEC 62717 |
| Color Rendering Index | IS 16103 (P-2) Cl. 9.3 & IEC 62717 |
| LED Module life | IS 16103 (P-2) Cl. 10, IEC 62717, IS 16105 & IES LM 80 |
| 7) LED Luminaries | |
| Luminance Flux | IS 16107-1 Cl.8.1, IEC 62722-1, IS 16107 (Part2/sec1), IEC 62722-2-1, IS 16106 & IES LM 79 |
| Luminous Intensity Distribution, Peak Intensity and Beam angle | IS 16107-1 Cl.8.2, IEC 62722-1, IS 16107 (Part2/sec1), IEC 62722-2-1, IS 16106 & IES LM 79 |
| Luminaire Efficacy | IS 16107-1 Cl.8.1, IEC 62722-1, IS 16107 (Part2/sec1), IEC 62722-2-1, IS 16106 & IES LM 79 |
| Chromaticity coordinates | IS 16107-1 Cl.9.1, IEC 62722-1, IS 16107 (Part2/sec1), IEC 62722-2-1, IS 16106 & IES LM 79 |
| Correlated Colour Temperature | IS 16107-1 Cl.9.2, IEC 62722-1, IS 16107 (Part2/sec1), IEC 62722-2-1, IS 16106 & IES LM 79 |
| Colour Rendering Index | IS 16107-1, IEC 62722-1, IS 16107 (Part2/sec1) Cl. 9 & IEC 62722-2-1 |
| LED Luminaire Life | IS 16107-1, IEC 62722-1, IS 16107 (Part2/sec1), Cl. 10 & IEC 62722-2-1 |
| 8) Luminaries, General Purpose Luminaries, Recessed Luminaries, Luminaries for Road & Street Lighting, Portable General Purpose Luminaries | |
| Photometric test | IS 10322 (P-5/Sec-1, Sec-2, Sec-3, Sec-4) |