MECHANICAL ANALYSIS OF TOYS AND SPORTS EQUIPMENT
DTH not only take up the monitoring of ambient air in normal urban conditions but also takes the challenges of conducting these assignments in adverse condition of Himalayan ranges and extremely rural areas of different part of the country.
There are several types of Air pollution and well-known effects of pollution; some are smog, acid rain, the greenhouse effect, and "holes" in the ozone layer. All these conditions have serious implications for our health and well being as well as for the whole environment.
1) Safety requirements for toys- Flammability requirement | |
Flammability test | IS: 9873 (P-2) & ISO:8124(P-2) |
2) Safety of Toys -Safety aspects related to Mechanical and Physical properties | |
Small Parts Test | IS:9873(P-1) & ISO:8124(P-1) |
Shape and Size | Cl. 5.3 IS:9873(P-1) & ISO:8124(P-1) |
Small Balls Test | Cl. 5.4 IS:9873(P-1) & ISO:8124(P-1) |
Test for Pompoms | Cl. 5.5 IS:9873(P-1) & ISO:8124(P-1) |
Test for Pre-school play figures | Cl. 5.6 IS:9873(P-1) & ISO:8124(P-1) |
Accessibility of Part or component | Cl. 5.7 IS:9873(P-1) & ISO:8124(P-1) |
Sharp-Edge Test | Cl. 5.8 IS:9873(P-1) & ISO:8124(P-1) |
Sharp Point Test | Cl. 5.9 IS:9873(P-1) & ISO:8124(P-1) |
Thickness of plastic film and Sheeting | Cl. 5.10 IS:9873(P-1) & ISO:8124(P-1) |
Determination of Cord Thickness and Length | Cl. 5.11 IS:9873(P-1) & ISO:8124(P-1) |
Stability and Overload Tests | Cl. 5.12 IS:9873(P-1) & ISO:8124(P-1) |
Test for Closure and toys chest lids | Cl. 5.13 IS:9873(P-1) & ISO:8124(P-1) |
Impact test for toys that cover the face | Cl. 5.14 IS:9873(P-1) & ISO:8124(P-1) |
Kinetic energy and Wall Impact Test | Cl. 5.15 IS:9873(P-1) & ISO:8124(P-1) |
Free-wheeling Facility and Brake performance Test | Cl. 5.16 IS:9873(P-1) & ISO:8124(P-1) |
Determination of Speed of electrically Driven ride-on toys | Cl. 5.17 IS:9873(P-1) & ISO:8124(P-1) |
Test For Temperature increase | Cl. 5.18 IS:9873(P-1) & ISO:8124(P-1) |
Leakage of liquid-Filled Toys | Cl. 5.19 IS:9873(P-1) & ISO:8124(P-1) |
Durability of Mouth-actuated toys | Cl. 5.20 IS:9873(P-1) & ISO:8124(P-1) |
Expanding Materials | Cl. 5.21 IS:9873(P-1) & ISO:8124(P-1) |
Folding or Sliding Mechanisms | Cl. 5.22 IS:9873(P-1) & ISO:8124(P-1) |
Washable Toys, Weight increase % | Cl. 5.23 IS:9873(P-1) & ISO:8124(P-1) |
Drop Test | Cl. 5.24.2 IS:9873(P-1) & ISO:8124(P-1) |
Tip-over test for large and bulky toys | Cl. 5.24.3 IS:9873(P-1) & ISO:8124(P-1) |
Dynamic Strength Test | Cl. 5.24.4 IS:9873(P-1) & ISO:8124(P-1) |
Torque Test | Cl. 5.24.5 IS:9873(P-1) & ISO:8124(P-1) |
Tension Test | Cl. 5.24.6 IS:9873(P-1) & ISO:8124(P-1) |
Compression Test | Cl. 5.24.7 IS:9873(P-1) & ISO:8124(P-1) |
Flexure Test | Cl. 5.24.8 IS:9873(P-1) & ISO:8124(P-1) |
Sound pressure level test | Cl. 5.25 IS:9873(P-1) & ISO:8124(P-1) |
Static Strength for toy scooters | Cl. 5.26 IS:9873(P-1) & ISO:8124(P-1) |
Dynamic Strength for toy scooters | Cl. 5.27 IS:9873(P-1) & ISO:8124(P-1) |
Brake Performance for toys scooters | Cl. 5.28 IS:9873(P-1) & ISO:8124(P-1) |
Strength of toy scooters steering tubes | Cl. 5.29 IS:9873(P-1) & ISO:8124(P-1) |
Resistance to separation of handle bar | Cl. 5.30 IS:9873(P-1) & ISO:8124(P-1) |
Tension test for magnets | Cl. 5.31 IS:9873(P-1) & ISO:8124(P-1) |
Magnetic Flux Index | Cl. 5.32 IS:9873(P-1) & ISO:8124(P-1) |
Impact test for Magnets | Cl. 5.33 IS:9873(P-1) & ISO:8124(P-1) |
Soaking test for Magnet | Cl. 5.34 IS:9873(P-1) & ISO:8124(P-1) |
Projectile Range | Cl. 5.35 IS:9873(P-1) & ISO:8124(P-1) |
Tip assessment of rigid projectiles | Cl. 5.36 IS:9873(P-1) & ISO:8124(P-1) |
Length of Suction cup projectiles | Cl. 5.37 IS:9873(P-1) & ISO:8124(P-1) |
3) Safety of Toys- Swings Slides & Similar activity toys for Indoor & Outdoor Family Domestic Use. Swings Slides Barriers Rung ladders Stepladders Stairways cross beam Entrapment Toddler Swings Seesaws Carousels and Rocking Toys Inflatable activity toys Paddling pools |
|
Maximum height | Cl. 4.1 IS:9873(P-1) & ISO:8124(P-1) |
Stability | Cl. 6.1.1, Cl. 6.1.2, Cl. 6.1.3, Cl. 6.1.4, Cl. 6.1.5 IS:9873(P-4) & ISO:8124(P-4) |
Static Strength | Cl. 6.2 IS:9873(P-4) & ISO:8124(P-4) |
Dynamic Strength of barriers and handrails | Cl. 6.3 IS:9873(P-4) & ISO:8124(P-4) |
Impact from swing elements | Cl. 6.4 IS:9873(P-4) & ISO:8124(P-4) |
Test for head and neck entrapment | Cl. 6.5 IS:9873(P-4) & ISO:8124(P-4) |
Toggle Test | Cl. 6.6 IS:9873(P-4) & ISO:8124(P-4) |
Test for protrusions | Cl. 6.7 IS:9873(P-4) & ISO:8124(P-4) |
Durability test for suspension connectors and means of suspensions | Cl. 6.8 IS:9873(P-4) & ISO:8124(P-4) |
Deflation of inflatable activity Toys | Cl. 6.9 IS:9873(P-4) & ISO:8124(P-4) |
Static Load Test for paddling pools with non-inflatable walls | Cl. 6.10 IS:9873(P-4) & ISO:8124(P-4) |
4) Safety of Electric toys / Plastic products | |
Power Input | Cl. 8 IS: 15644 & IEC: 62115 |
Heating and abnormal operation | Cl. 9 IS: 15644 & IEC: 62115 |
Electric strength at operating temperature | Cl. 10 IS: 15644 & IEC: 62115 |
Moisture Resistance | Cl. 11 IS: 15644 & IEC: 62115 |
Electric strength at room temperature | Cl. 12 IS: 15644 & IEC: 62115 |
Mechanical strength | Cl. 13 IS: 15644 & IEC: 62115 |
Construction | Cl. 14 IS: 15644 & IEC: 62115 |
Components | Cl. 16 IS: 15644 & IEC: 62115 |
Screw and connections | Cl. 17 IS: 15644 & IEC: 62115 |
Clearance and creepage distance | Cl. 18 IS: 15644 & IEC: 62115 |
Resistance to heat and fire | Cl. 19 IS: 15644 & IEC: 62115 |
Ball Pressure Test | IEC: 60695-10-2 |
Glow Wire Test | IEC: 60695-2-11 |
Radiation, toxicity and similar hazards | Cl. 20 IS: 15644 & IEC: 62115 |