| 1) Polyurethane Enamel, Paint |
| Drying Time |
IS 101(Part 3/Sec 1) |
| Consistency/ viscosity |
IS 101 (Part 1/Sec 5) |
| Finish |
IS 101 (Part 3/Sec 4) |
| Colour |
IS 101 (Part 4/Sec 2) & IS 5 |
| Dry film thickness |
IS 13213 |
| Volume solids |
IS 13213 |
| Scratch hardness |
IS 101 (Part 5/Sec 2) |
| Flexibility and adhesion |
IS 101(Part 5/Sec 2) |
| Flash point |
IS 101(Part 1/Sec 6) |
| Fineness of grind |
IS 101 (Part 3/Sec 5) |
| Pot life |
IS 13213 |
| Gloss at 45 deg angle incidence |
IS 101(Part 4/Sec 4) |
| Weight in Kg/10 litre |
IS 101 (Part 1/Sec 7) |
| Resistance to sulphuric acid (Gloss retention) |
IS 13213 |
| Resistance to caustic potas (Gloss retention) |
IS 13213 |
| Resistance to Oil (Gloss retention) |
IS 13213 |
| Resistance to solvent (Gloss retention) |
IS 13213 |
| Durability test |
IS 13213 |
| Keeping properties |
IS 101 (Part 6/ Sec-1) |
| 2) Distemper |
| Analysis of Pb, Cu, Cr, Cd, Hg, Se |
ASTM E-1621-1994/ DTH/Distemper/WI/Metal/01 (AAS/ICPMS ) |
| Toxic & Heavy Metal : - Nickel, Cadmium, Lead, Arsenic, Manganese, Selenium, Antimony & Tin |
DTH/Distemper/WI/Metal/01 (AAS/ICPMS) |
| 3) Thermoplastic Paints |
| Titanium Di-oxide |
IS 1527 |
| Calcium Carbonate and Inert Fillers |
IS 8767 |
| Glass Beads Contents |
BS 3262 (Part 1) |
| Binder |
BS 3262 (Part 1) |
| Softening point |
ASTM D 36-95 |
